In this video, we’ll look at the different steps in the repair and preventive maintenance process for a Fanuc Drive Spindle model A06B-6079. In this video, we show you the work process for preventive maintenance. We see the entire process, beginning with initial testing, through repair, and subsequent quality testing that verifies the repair.
Repair process and preventive action.
Our technicians show us in detail the preventive maintenance process for this Fanuc Drive Spindle. This is a widely used model on the market, and you’re sure to be familiar with it. That’s why we’ve chosen it as a reference for our maintenance process.
The first step will be to perform a visual inspection and a series of measurements to locate obvious faults. In a second phase, the equipment will be tested on the test bench to reproduce the fault observed by the customer. The equipment will then be disassembled and cleaned for subsequent repair and maintenance of any components that require it. Finally, once the equipment has been repaired and commissioned, it undergoes a series of tests in the control check area to confirm its proper functioning. During these tests, videos are made to document the proper functioning of the equipment undergoing maintenance or repair.
In the video, you can see this entire process in detail.
We hope the explanations are helpful, and as we always remind you, you can report any problems using THIS SAME FORM.
